BARFIDE
MADE IN FRANCE

SORTER WITH
CONTAINERS
SP0

description

Turntable to collect parts that come out of the machine and to separate the inspection parts.

The parts collector disc is divided up by six containers, each with one dish to collect production parts and a second, smaller dish for the inspection parts to be collected separately.

The whole assembly is resistant to cutting oils and shavings, and can be incorporated into the inside of the machining centres.

The top part is interchangeable according to the size of the parts to be processed.

The sorter has an electric motor powered at 24 Vdc. It can be powered directly from the machining centre, or via a 200-Vac/24-Vdc transformer.

Handle to carry the tray and the containers
Engraved container identification ring
Motor housing
Adjustable part catcher chute with
shock-absorbent coating
Grey container for easy identification
Inspection parts receiving cells – V2
Production parts receiving cells – V1
Oil overflow

CHARACTERISTICS

Red and grey anodised aluminium drive block.
24-Vdc motor.
Moving tray with built-in sampling containers.
Three possible configurations: Ø125 / Ø150 / Ø180 mm.
Adjustable ramp.
Maximum rate: 3 seconds/part.
1 container of the 6 is a different colour, to indicate the progression of the SP0 at a glance.
Bulk storage with tolerance to impacts between the parts.
Minimum dimensions of parts = Ø1 mm, length 1 mm.
Maximum dimensions of parts = Ø5 mm, length 15 mm.

SPECIAL MANUFACTURE ON REQUEST

units

SEPARATE CONTROL UNIT,
TWO TYPES OF UNIT: TEMPO OR TACTILE

“TEMPO” consisting of an On/Off button, a time delay for the production part (V1) and a time delay for the sampling part (V2). The time delays must be set according to the desired cycle time and number of parts.
“TACTILE” consisting of an On/Off button and a touch screen to configure the number of production parts (V1) and the number of sample parts (V2). A 24 Vdc input counts the parts via signals from the machining centre.

There are two versions of each type of unit: magnet at the top, or magnet at the back.

ELECTRICAL CONNECTIONS:

Power supply cable kit (M12 5-core cable, length 5 m).
Internal power supply kit (24-V 2.5-A power supply / M12 bulkhead gland fitting / M12 5-core cable, length 5 m).
External power supply kit (cable with a 24-V transformer).

SP0

récupérateur de pièces & tubes de réductions

SORTER WITHCONTAINERSSP0

SEPARATE CONTROL UNIT, TWO TYPES OF UNIT: TEMPO OR TACTILE

SORTER WITH
CONTAINERS
SP0

SEPARATE CONTROL UNIT,
TWO TYPES OF UNIT: TEMPO OR TACTILE