BARFIDE
MADE IN FRANCE

SORTER WITH
CONTAINERS
SP1

description

Turntable to collect parts that come out of the machine and to separate the inspection parts.

The parts collector disc is divided up by six containers, each with one dish to collect production parts and a second, smaller dish for the inspection parts to be collected separately.

The whole assembly is resistant to cutting oils and shavings, and can be incorporated into the inside of the machining centres.

The top part is interchangeable according to the size of the parts to be processed.

The sorter has an electric motor powered at 24 Vdc. It can be powered directly from the machining centre, or via a 200-Vac/24-Vdc transformer.

Handle to carry the tray and the containers
Engraved container identification ring
Motor housing
Oil overflow
Production parts receiving cells – V1
Inspection parts receiving cells – V2
Adjustable part catcher chute with shock-absorbent coating
Grey container for easy identification

CHARACTERISTICS

Red and grey anodised aluminium drive block.
24-Vdc motor.
Moving tray with built-in sampling containers.
Three possible configurations with plastic containers, built-in sampling Ø200 / Ø275 / Ø350 mm.
Two possible configurations with steel containers, separate sampling Ø350 H130 mm and Ø350 H210 mm.
Adjustable ramp.
Maximum rate: 4 seconds/part.
1 plastic container of the 6 is a different colour, to indicate the progression of the SP1 at a glance.
Bulk storage with tolerance to impacts between the parts.
Minimum dimensions of parts = Ø1 mm, length 1 mm.
Maximum dimensions of parts = Ø40 mm, length 100 mm.

units

SEPARATE CONTROL UNIT,
TWO TYPES OF UNIT: TEMPO OR TACTILE

“TEMPO” consisting of an On/Off button, a time delay for the production
part (V1) and a time delay for the sampling part (V2). The time delays
must be set according to the desired cycle time and number of parts.
“TACTILE” consisting of an On/Off button and a touch screen to configure
the number of production parts (V1) and the number of sample parts
(V2). A 24-Vdc input counts the parts via signals from the machining
centre.

There are two versions of each type of unit: magnet at the top, or magnet at the back.

ELECTRICAL CONNECTIONS :

Power supply cable kit (M12 5-core cable, length 5 m).
Internal power supply kit (24-V 2.5-A power supply / M12 bulkhead gland fitting / M12 5-core cable, length 5 m).
External power supply kit (cable with a 24-V transformer).

SP1

récupérateur de pièces & tubes de réductions

SORTER WITHCONTAINERSSP1

SEPARATE CONTROL UNIT, TWO TYPES OF UNIT: TEMPO OR TACTILE

SORTER WITH
CONTAINERS
SP1

SEPARATE CONTROL UNIT,
TWO TYPES OF UNIT: TEMPO OR TACTILE