parts catchers & reduction tubes

BARFIDE
MADE IN FRANCE

ACCUMULATION
TABLE
ATS

More details
PDF
Video
barfide-ATS-2.0

01

description

The ATS turntable is used to collect parts coming out of machining centres whilst avoiding impacts.

This turntable is powered simply at 230 Vac, and rotates so that it collects the parts at its middle, without them colliding with one another.

The turntable and all surfaces in contact with parts are coated in a shock-absorbent material.

Oils are evacuated at the edge of the turntable and collected in the table (oil connection with inner Ø 16 mm hose).

02

  1. Inlet area
  2. Working area
  3. Oil drain
  4. 4 adjustable feet
  5. Adjustable table height
  6. Control unit
barfide-ATS-2.0
1

Inlet area

2

Working area

3

Oil drain

4

4 adjustable feet

5

Adjustable table height

6

Control unit

03

CHARACTERISTICS

Technical Specifications:

  • Rotating table Ø 700 mm.
  • Maximum dimensions of the pieces = Ø 65×100 mm.
  • Minimum dimensions of the pieces = Ø 8×8 mm.
  • Spherical pieces not recommended.

 

Overall Product Functionality:

  • Cycle time: 2 seconds.
  • Hourly output: 1800 pieces.
  • Daily working time: 24 hours.

 

Cycle Description:

  • The part arrives in the inlet area of the ATS, where the shocks are absorbed, then is channelled to the accumulation area through the rotation of the turntable.
  • The cycle time corresponds to the time taken for the part to leave the inlet area (1 part at a time in the inlet area).

 

Connection:

  • Connect the ATS electrically using a 5-m 3G1.5² cable to be connected to the 230 Vac mains.
  • The ATS must be connected to a holding tank with an inner Ø 16 mm hose.

 

Human-Machine Interface:

Use the control unit to start and stop the ATS. The unit has a time delay to adjust the turntable rotation on and off time according to the part cycle time.

Option:

  • Basket stand

 

SPECIAL MANUFACTURE ON REQUEST

ENLARGE

ATS

CONFIGURATOR